qexml_read_planewaves IOTK error

Having trouble compiling the Yambo source? Using an unusual architecture? Problems with the "configure" script? This is the place to look.

Moderators: Daniele Varsano, andrea.ferretti, andrea marini, Conor Hogan, myrta gruning

Forum rules
If you have trouble compiling Yambo, please make sure to list:
(1) the compiler (vendor and release: e.g. intel 10.1)
(2) the architecture (e.g. 64-bit IBM SP5)
(3) if the problems occur compiling in serial/in parallel
(4) the version of Yambo (revision number/major release version)
(5) the relevant compiler error message

qexml_read_planewaves IOTK error

Postby giacsport » Wed May 19, 2010 7:55 am

Dear All,
I am not a deep expert of Linux. I tried installing YAMBO on my machine using this string

./configure --with-netcdf-include=/home/giacomo/src/net/include/ --with-netcdf-lib=/home/giacomo/src/net/lib/ --with-iotk=/home/giacomo/src/espresso-4.2/iotk/ --with-p2y=4.0 PFC=ifort FC=ifort FCFLAGS="-O2 -assume byterecl -g -traceback -nomodule -fpp -D__INTEL -D__FFTW -I../include -static" --enable-largedb --enable-dp --with-blas="-lblas -lg2c" --with-lapack=-llapack

then

make yambo

and

make interfaces

Everything seems to be correct. it seems that the compilation has been successful.

Now, I run a PW job. It is the example01 in the 4.2 release of espresso. A simple band calculation for bulk Si.
When i launch the ./p2y in order to obtain the yambo input, I get this message

[giacomo@domitianus silicon.save]$ p2y

__ __ _______ __ __ _______ _______
| | | || _ || |_| || _ || |
| |_| || |_| || || |_| || _ |
| || || || || | | |
|_ _|| || || _ | | |_| |
| | | _ || ||_|| || |_| || |
|___| |__| |__||_| |_||_______||_______|

<---> [01] P(W) 2 Y(ambo) Ver. 4.0
<---> DBs path set to .
<---> Index file set to data-file.xml
<---> Header/K-points/Energies...done
<---> Cell data...done
<---> Atomic data...done
<---> Symmetries...

[ERROR] STOP signal received while in :[01] P(W) 2 Y(ambo) Ver. 4.0
[ERROR] Non-symmorphic symmetry operations are not supported! Use nosym=.true.ed in PWSCF

I checked the list and understood the reason. Then I correct my PWSCF input accordingly and I obtain this other message

[giacomo@domitianus silicon.save]$ p2y

___ __ _____ __ __ _____ _____
| Y || _ || Y || _ \ | _ |
| | ||. | ||. ||. | / |. | |
\_ _/ |. _ ||.\_/ ||. _ \ |. | |
|: | |: | ||: | ||: | \|: | |
|::| |:.|:.||:.|:.||::. /|::. |
`--" `-- --"`-- --"`-----" `-----"

<---> [01] P(W) 2 Y(ambo) Ver. 4.0
<---> DBs path set to .
<---> Index file set to data-file.xml
<---> Header/K-points/Energies...done
<---> Cell data...done
<---> Atomic data...done
<---> Symmetries...[ID yes]...[INV no]...[TR yes]...[SI no]
<---> XC functional...Perdew & Zunger (xc)
<---> K-points mesh...done
<---> RL vectors...

[ERROR] STOP signal received while in :[01] P(W) 2 Y(ambo) Ver. 4.0
[ERROR]Error in qexml_read_planewaves IOTK error ierr: 1

:?: :?: :?:

Could anyone kindly help me to fix this problem?
I attach the config.log

Thanks in advance!
My very best
Giacomo


Giacomo Giorgi, PhD,
Department of Chemical System Engineering,
School of Engineering,
The University of Tokyo,
7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656
You do not have the required permissions to view the files attached to this post.
giacsport
 
Posts: 14
Joined: Tue Oct 06, 2009 9:36 am

Re: qexml_read_planewaves IOTK error

Postby feffeficus » Wed May 19, 2010 8:53 am

Hi Giacomo.

Well, I found several problems in linking the iotk in these days....(I'm going to post in a while again for the happiness of yamboers..)

I've read in a previous post on the forum, http://www.yambo-code.org/forum/viewtopic.php?f=1&t=75 that you can even link the lib_iotk from version 4.0.5 and read safely the .save from espresso_4.1.1 version for example.
This case is tested and it works.

in your case, since the epsresso_4.2. is very new, maybe there are still some instabilities with that.
I suggest you to stay on the previous version of espresso for the moment.

ciao, have fun!
federico.
Last edited by feffeficus on Wed May 19, 2010 9:01 am, edited 1 time in total.
Federico Iori - LSI - Ecole Polytechnique (Palaiseau) France - http://www.etsf.polytechnique.fr
feffeficus
 
Posts: 31
Joined: Tue Apr 07, 2009 4:39 pm

Re: qexml_read_planewaves IOTK error

Postby claudio » Wed May 19, 2010 9:00 am

Hi Giacomo

another comment: use force_symmorphic=.true. instead of nosym=.true. if you have a version of PWSCF
more recent than 4.0.5.

A question: did you use wf_collect=.true. in your PWSCF input?
if not use it.

cla
Claudio Attaccalite
Institut Neel, CNRS/UJF ABINEEL group
25 rue des Martyrs BP 166, B√Ętiment D
38042 Grenoble cedex 9 France
web site: http://www.attaccalite.com
Freely download scientific books from: http://www.freescience.info
User avatar
claudio
 
Posts: 217
Joined: Tue Mar 31, 2009 11:33 pm

Re: qexml_read_planewaves IOTK error

Postby Conor Hogan » Wed May 19, 2010 9:06 pm

claudio wrote:A question: did you use wf_collect=.true. in your PWSCF input?
if not use it.

Looks like the problem to me: check that there is a file gvectors.dat inside the .save directory.
If there is, the problem lies elsewhere...
Conor
Dr. Conor Hogan
CNR-ISM, via Fosso del Cavaliere, 00133 Roma, Italy;
Department of Physics and European Theoretical Spectroscopy Facility (ETSF),
University of Rome "Tor Vergata".
User avatar
Conor Hogan
 
Posts: 143
Joined: Tue Mar 17, 2009 12:17 pm

Re: qexml_read_planewaves IOTK error

Postby giacsport » Thu May 20, 2010 1:40 am

Dear Conor,
yes there is that gvectors.dat file.....
But now by changing the lib_iotk to those of the 4.1.3 and adding wf_collect=.true. and force_symmorphic=.true. in the PW input
the yambo input seems to be created correctly by "./p2y"

What do you mean for "elsewhere"? Are there additional instructions for debugging the compilation?

My very best,
Giacomo

Giacomo Giorgi, PhD,
Department of Chemical System Engineering,
School of Engineering,
The University of Tokyo,
7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656
giacsport
 
Posts: 14
Joined: Tue Oct 06, 2009 9:36 am

Re: qexml_read_planewaves IOTK error

Postby Conor Hogan » Thu May 20, 2010 10:55 am

Dear Giacomo,

giacsport wrote: and adding wf_collect=.true.


No other problems - this is all you had to do. Let us know if you run into problems immediately with running yambo, though.
Regards,
Conor
Dr. Conor Hogan
CNR-ISM, via Fosso del Cavaliere, 00133 Roma, Italy;
Department of Physics and European Theoretical Spectroscopy Facility (ETSF),
University of Rome "Tor Vergata".
User avatar
Conor Hogan
 
Posts: 143
Joined: Tue Mar 17, 2009 12:17 pm

about the parallel installation with open-mpi

Postby giacsport » Thu May 20, 2010 11:37 am

Dear Conor,
thanks a lot for your availability!

Very best
G

P.S.: One more question (hopefully the last....) if I can.... for the parallel installation (open-mpi) I used the same script

./configure --with-netcdf-include=/home/giacomo/src/net/include/ --with-netcdf-lib=/home/giacomo/src/net/lib/ --with-iotk=/home/giacomo/src/espresso-4.1.3-mpi/iotk --with-p2y=4.0 PFC=mpif90 FC=ifort FCFLAGS="-O2 -assume byterecl -g -traceback -nomodule -fpp -D__MPI" --enable-largedb --enable-dp --with-blas="-lblas -lg2c" --with-lapack=-llapack --with-mpi

changing thus PFC=ifort -> PFC=mpif90
and adding "--with-mpi"

the compilation seems to be successful

then "make yambo" and "make interfaces"

but when I launch the "./p2y" I have

[giacomo@domitianus bin]$ ./p2y
forrtl: severe (174): SIGSEGV, segmentation fault occurred
Image PC Routine Line Source
p2y 000000000041B0D7 Unknown Unknown Unknown
p2y 000000000041BDB2 Unknown Unknown Unknown
p2y 0000000000419CEA Unknown Unknown Unknown
p2y 000000000052A7D6 Unknown Unknown Unknown
libc.so.6 000000363F21C40B Unknown Unknown Unknown
p2y 000000000041992A Unknown Unknown Unknown

And honestly I am not able to figure out the reason.
Have you got some hints to suggest me?

Still excuse me for the stress!
:roll: :oops:

Thanks!
Ciao!
Giacomo

Giacomo Giorgi, PhD,
Department of Chemical System Engineering,
School of Engineering,
The University of Tokyo,
7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656
You do not have the required permissions to view the files attached to this post.
giacsport
 
Posts: 14
Joined: Tue Oct 06, 2009 9:36 am

Re: qexml_read_planewaves IOTK error

Postby giacsport » Thu May 20, 2010 12:07 pm

Dear Conor,
please ignore my previous message.... I think I fixed the bug on my own! :mrgreen: :mrgreen: :mrgreen:

Thanks in any case for your availability!


Very best

Giacomo


Giacomo Giorgi, PhD,
Department of Chemical System Engineering,
School of Engineering,
The University of Tokyo,
7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656
giacsport
 
Posts: 14
Joined: Tue Oct 06, 2009 9:36 am


Return to Compilation

Who is online

Users browsing this forum: Google [Bot] and 1 guest